MOTU 828 錄音介面，2024最新款

著名的 ESS Sabre32™ DAC 技術提供 125 dB 動態範圍和極低的諧波失真。類比性能由數十年的音訊介面技術工程專業知識驅動。 適用於 Mac、PC 和 iOS 的通用連接 透過 5 Gbps USB 3（相容於 USB 2）連接到您的 Mac、PC 或 iOS 設備，最多可提供 60 個音訊通道（28 個輸入和 32 個輸出）。

MOTU 828 錄音介面

Audio Performance Superb analog audio quality.Renowned ESS Sabre32™ DAC technology delivers 125 dB dynamic range and extremely low harmonic distortion. Analog performance is driven by decades of engineering expertise in audio interface technology.

Universal connectivity for Mac, PC and iOS Connect to your Mac, PC or iOS device with 5 Gbps USB 3 (compatible with USB 2), with up to 60 audio channels (28 in and 32 out). Class-compliant firmware means you can plug-and-play with Mac or iOS hosts, no driver needed. Industry standard high-performance drivers work with any audio apps. Connect directly to your iPad™ via USB-C or a standard camera connection kit (Lightning adapter).

60 simultaneous audio channels Connect all your studio gear, including.microphones, guitars, synths, keyboards, drum.machines, outboard processors, MIDI gear,optical expanders — even a foot pedal. All 28 inputs and 32 outputs are available simultaneously.

Ultra-low latency performance Optimized drivers for both Mac and PC deliver renowned, ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 828 delivers an astonishing round trip latency (RTL) of ~2 ms (milliseconds) over USB (2 or 3) at 96 kHz with a 32-sample host buffer.

Transparent mic channels and hi-Z guitar inputs Capture your recorded material in its truest, most natural form with -113 dB THD+N, 115 dB dynamic range and -129 dBu EIN performance. Each mic channel has individual preamp gain,pad, 48V phantom power and remote control from your computer or iOS device. Each combojack alternately provides a 1/4-inch high-impedance TS guitar input for DI tracking and reamping.

DIY guitar re-amping DI your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic’d up amp simultaneously. Then re-amp the dry signal later with different amps and cabs — or amp modeling plug-ins — to experiment with different tones. No need to re-plug cables between recording and re-amping. 

Extra line inputs when you need them Do you work with compressors and other outboard gear? Each 828 mic input offers adedicated analog send/return loop, allowing for both mono or stereo mic channel outboard processing via fully balanced connections. If nothing is plugged in to a mic input, its return serves as an extra line input with identical signal characteristics to all other line inputs.